Embedded Files
All routers with DD-WRT are fully supported by AuthVela.
All routers with DD-WRT are fully supported by AuthVela.
To connect your DD-WRT network device to AuthVela account you need to do following steps:
To connect your DD-WRT network device to AuthVela account you need to do following steps:
- Go to your router admin dashboard and select ‘Wireless’ tab in the top menu.
(usually it’s http://192.168.1.1 or http://192.168.0.1).
Fill-in ‘Basic Settings’ values as in screenshot below and set your Wi-Fi network name as Wireless Network Name (SSID) field value.
NOTE: You will be requested for access point administrator credentials in order to get access to 'Wireless' configuration.
2. Select 'Wireless Security' in the sub-menu and fill values as in the screenshot below.
2. Select 'Wireless Security' in the sub-menu and fill values as in the screenshot below.
NOTE: Radius Auth and Radius Acct values need to be copied from your AuthVela account.
To get AuthVela RADIUS configuration properties for your account you need to login to AuthVela and go to 'Connection Settings'
NOTE: Key renewal interval (in seconds) is period of time when Wi-Fi client will be forced to re-authroize to your network for new session keys. In this manual we use 24 hours interval. This value may be reduced by administrator if required.
3. Click ‘Save’ and then ‘Apply Settings’ buttons in the bottom of the page.
3. Click ‘Save’ and then ‘Apply Settings’ buttons in the bottom of the page.
In a few seconds DD-WRT will apply new settings and your router will be connected to AuthVela. Now users can connect to your network.
NOTE: if settings are not being applied or you cannot connect to the Wi-Fi network - try rebooting your DD-WRT router. You can execute router reboot under ‘Administration’ tab.
Page updated
Google Sites
Report abuse